 |
|||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
||
 |
 |
 |
 |
||
 |
 |
 |
 |
||
AeroconAmp 02
Single Channel Instrument Amplifier for
Load Cells and Pressure Transducers
A simple yet sophisticated amplifier for millivolt load cells and pressure transducers
Available Now - $90.00
The Aerocon AMP-02 is designed to amplify small voltage and current sensor output signals. The output of the Amp-02 ranges from 0 to 10V and may be connected to an analog-to-digital converter (ADC), such as a Dataq, for digitization and display on a PC.
A battery voltage of anywhere from 12V to 36V may be used to power the Amp-02.
Specifications:
Compatible with 2 mV/V and 3 mV/V strain gauges and load cells, jumper
selectable
Bandwidth 400Hz
Very low noise. Less than 0.5LSB into a 12 bit ADC
10V excitation voltage with output current limiting
High impedance differential input 0-10V output
Supply voltage 12V to 36V
Make your choices and take personal responsibility for the outcome of your experiment!
Protect your privilege to fly rockets by not making the headlines or becoming a statistic.